WinAccess · Smart Door Access

Cloud Door Access Control in Egypt
for Offices, Buildings and Hotels

WinAccess is a cloud door access control system from WinFi in Cairo. Grant or revoke access to any door in seconds, from any browser. It replaces keys and standalone controllers with one cloud dashboard for every door, user and site — and keeps doors working on stored rules if the internet goes down.

Hardware designed and made in Egypt by WinFi: one controller per door, NFC card, QR and PIN readers, and your logo on every front panel.

500+
Doors managed
160+
Businesses on WinFi
4
Ways to unlock
Offline
Doors keep working

WinAccess at a glance

What it is
A cloud-based door access control system: door controllers and readers on site, managed from one cloud dashboard and the WinFi mobile app.
Made by
WinFi, Cairo. The controller and readers are designed and made in Egypt.
Doors
One WinAccess Controller per door. 500+ doors managed today.
Ways to unlock
WinFi app (Bluetooth, NFC tap or the door’s QR code), NFC access card, personal QR code or PIN.
Offline mode
Doors keep working without internet: unlimited app users and up to 1,000 card, QR or PIN users per controller.
Locks
12 V DC electric strikes and magnetic locks, up to 3 A, fail-safe or fail-secure per door.
Management
Multi-site and multi-tenant, with schedules, roles, emergency lockdown and a full audit log.
Used in
Offices, co-working spaces, commercial buildings, hotels and schools across Egypt.

Keys and standalone controllers leave you blind

Traditional access control creates the same three problems in every building.

No remote control

Opening a door for a delivery or a late visitor means someone has to be physically on site.

No instant revocation

When someone leaves, their key or card keeps working until it is collected or the lock is changed.

No audit trail

When something goes missing, there is no record of who entered which room, or when.

Every door, user and site in one cloud dashboard

Manage access the way you manage everything else: from a browser, in real time.

Instant access changes

Add a new employee, disable a card or change a PIN in real time, from any device.

Access schedules

Time-based rules per user, group or door zone — office hours for staff, set windows for cleaners and contractors.

Groups and roles

Role-based access for staff, management, contractors and visitors.

Multi-site and multi-tenant

Separate access zones per company, floor or tenant, and every building in one account.

Full audit log

Every entry and failed attempt, timestamped, searchable and exportable.

Door status alerts

Live open or closed status from each door sensor, plus an alert when a door controller goes offline.

Emergency lockdown

Lock every door on a site with a single command.

Standalone offline mode

Controllers store access rules and keep granting access from the last-synced credentials when the internet is down.

Mobile access: one tap, every door

The WinFi app for iOS and Android turns each user’s phone into their key.

Tap to Unlock

A single button on the home screen. Unlock over Bluetooth, tap the phone on the door’s Mobile Reader or scan its QR code — the app remembers which method each user prefers.

Master Key for admins

Admins can unlock any eligible door remotely with one tap, for a delivery, a locked-out colleague or an early contractor.

Access tab

Every door the user can open, with its location, floor and map link.

Cards, PINs and virtual cards

Physical cards and PIN keypads work alongside the app, so every user has a credential that suits them.

Choosing door access in Egypt: six questions to ask

Whichever system you choose, ask these before you sign. Here is how WinAccess answers each one.

Does it keep working when the internet drops?

WinAccess controllers store access rules on site and keep opening doors for unlimited app users and up to 1,000 card, QR or PIN users.

What happens in a power cut?

Controllers have no internal battery, so plan a UPS for doors that must work around the clock, and set each lock fail-safe or fail-secure to suit your fire-safety requirements.

Who builds and supports the hardware?

WinAccess controllers and readers are designed and made in Egypt by WinFi and supported by our team in Cairo.

Can you run every site from one place?

Yes. Every building, floor and tenant sits in one cloud account, with separate access zones and admins.

How will people unlock the door?

By phone (Bluetooth, NFC tap or the door’s QR code), NFC access card, personal QR code or PIN. One user can hold several.

Can you prove who entered, and when?

Every entry and failed attempt is logged with the door, user, credential and time, and can be searched and exported.

Door access hardware, designed and made in Egypt

One controller per door and the readers you choose, designed and built by WinFi in Egypt and managed from the same dashboard. Every front panel carries your logo.

WinAccess Controller

One door · RS-485 · WiFi · BLE 5.0

A wall unit inside the door, 120 × 80 mm, that fits a standard 7 × 10 cm wall box. It switches the lock, reads the door sensor and has a built-in touch exit button, plus an input for an external one.

  • One controller per door
  • 12 V DC lock relay, up to 3 A
  • Offline: unlimited app users, 1,000 card, QR or PIN users

Card, QR and PIN readers

RS-485 · Mounted outside the door

Choose how people enter each door: an NFC card reader, a QR reader that scans each user’s personal QR code, or a PIN keypad. Readers connect to the controller over RS-485.

  • NFC access cards
  • Personal QR codes
  • PIN codes

Mobile Reader

Passive · No wiring or power

A door QR code and tap zone read by the WinFi app, which then unlocks the door through the controller. Nothing to cable and nothing to power.

  • Works with the WinFi app
  • No wiring, no power

WinAccess drives 12 V DC electric strikes and magnetic locks, fail-safe or fail-secure per door. Each controller runs on 12 V DC, 1 A and reaches the WinFi cloud over WiFi. There is no internal battery, so we recommend a UPS for doors that must work around the clock.

How a WinAccess installation works

  1. 1

    Site survey and door map

    Engineers audit every door, confirm lock types, map cabling routes and design the access zones.

  2. 2

    Hardware installation

    Controllers are installed, cabling is run, readers are mounted and locks are wired and tested.

  3. 3

    Cloud setup and testing

    Users, groups and schedules are created, and every door is tested with every credential type.

  4. 4

    Handover and training

    Admins are trained on the dashboard, credential issuing, emergency lockdown and the audit log.

WinAccess by industry

WinAccess controls doors in shared workspaces, offices, hotels and schools across Egypt.

WinAccess FAQ

Answers to the questions we hear most often.

What is WinAccess?

WinAccess is WinFi’s cloud-based door access control system for businesses in Egypt. Door controllers and readers are installed on site, and you manage users, schedules and doors for all your buildings from one cloud dashboard and the WinFi mobile app.

Is WinAccess hardware made in Egypt?

Yes. The WinAccess Controller and the NFC card, QR and PIN readers are designed and made in Egypt by WinFi, and supported by WinFi’s team in Cairo. Every front panel carries the client’s own logo.

How much does door access control cost in Egypt?

It depends on the number of doors, the reader chosen for each door and the locks already fitted. WinFi quotes each project in EGP after a site survey of your doors.

What happens to the doors if the internet goes down?

They keep working. Each controller stores access rules and credentials for unlimited app users and up to 1,000 card, QR or PIN users, and keeps granting access from the last-synced rules. Live monitoring and remote control resume as soon as the connection is back.

Which credentials does WinAccess support?

The WinFi mobile app (Bluetooth, NFC tap or the door’s QR code), physical NFC access cards, personal QR codes, virtual cards and PIN codes. A single user can have more than one credential.

Can WinAccess work with our existing door locks?

WinAccess drives 12 V DC electric strikes and magnetic locks, up to 3 A per door; it does not drive locks on other voltages. During the site survey we confirm each lock, and whether it should be fail-safe or fail-secure under your building’s fire-safety requirements.

What cabling and power does each door need?

One WinAccess Controller per door, mounted inside on a standard 7 × 10 cm wall box, with 12 V DC power and WiFi with internet access. NFC card, QR and PIN readers connect to the controller over RS-485 cable. The Mobile Reader is passive and needs no cabling or power.

Can we manage several buildings or tenants?

Yes. WinAccess is multi-tenant: each company, floor or tenant can have its own access zones and admins, and all your buildings sit in one account.

How do we see who entered a room?

Every access event, including failed attempts, is recorded in the audit log with the door, user, credential type and time. You can search it and export it.

Take control of every door

Request a site assessment and we will map your doors, recommend the right hardware and show you the dashboard.